Experienced supplier of AMS 5596,UNS N07718,INCONEL 718

Home > Product > Special Alloy Fastener > Inconel Alloy > INCONEL 718 SHEET - AMS 5596 - UNS N07718 ALLOY Fastener

INCONEL 718 SHEET - AMS 5596 - UNS N07718 ALLOY Fastener

Tel: 0086-21-68413710
E-mail: jminfo@jm-industry.com

Description
Application
TECHNICAL DATA

Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F. One of the distinguishing features of Inconel 718’s composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling.

INCONEL
Raw Material	Unified Numbering System (UNS)	DIN EN	Common Trade Name
Inconel Alloy 600	N06600	2.4816	Inconel® 600
Inconel 600 Specifications: UNS N06600, AMS 5540, AMS 5665, ASME SB-166, ASME SB-167, ASME SB-168, ASTM B166, ASTM B167, ASTM B168, DIN EN 2.4816
Inconel Alloy 601	N06601	2.4851	Inconel® 601
Inconel 601 Specifications: UNS N06601, AMS 5715, AMS 5870, ASME SB-167, ASME SB-168, ASTM B167, ASTM B168, DIN EN 2.4851
Inconel Alloy 625	N06625	2.4856	Inconel® 625
Inconel 625 Specifications: UNS N06625, AMS 5666, AMS 5837, ASME SB-443 Gr 1, ASME SB-446 Gr 1, ASTM B443 Gr 1, ASTM B446 Gr 1, ISO 15156-3, NACE MR0175-3, DIN EN 2.4856
Inconel Alloy 718	N07718	2.4668	Inconel® 718
Inconel 718 Specifications: UNS N07718, AMS 5596, AMS 5662, AMS 5663, AMS 5832, ASME Case 2222-1, ASME SFA 5.14, ASTM B637, ASTM B670, GE B50TF14, GE B50TF15, DIN EN 2.4668

Forms of INCONEL 718 Fastener Available at JM-INDUSTRY

	Product name	Standard No.	Size
BOLT	HEX HEAD BOLT	ANSI/ASME B18.2.1, DIN933, DIN931	1/4”-4”, M5-M100
	SOCKET CAP SCREW	ANSI/ASME B18.3, DIN912, DIN7991, DIN913/916	1/4”-4”, M5-M100
	FLANGE BOLT	ANSI/ASME B18.2.3.4M-2001, DIN 6921	1/2”-4”, M10-M100
	EYE BOLT	ANSI/ASME, DIN standard	1/2”-4”, M10-M100
	OTHER BOLT	U BOLT, T BOLT, J BOLT, SQURE HEAD BOLT, SHOULDER BOLT, AND NON-STANDARD BOLT ACCORDING TO CUSTOMER NEEDS.
STUD	THREADED ROD/BAR	ANSI/ASME, DIN975/DIN976	3/8”-4”, M5-M100
STUD	DOUBLE ENDS STUDS	ANSI/ASME, DIN STANDARD	3/8”-4”, M5-M100
NUT	HEX NUT	ANSI/ASME B18.2.2, DIN934	1/4”-4”, M5-M100
	HEAVY HEX NUT	ANSI/ASME B18.2.2, DIN standard	1/2”-4”, M12-M100
	NYLON LOCK NUT	ANSI/ASME B18.16.6-2008, DIN 985,DIN982	1/2”-4”, M12-M100
	FLANGE NUT	ANSI/ASME, DIN6923	1/2”-4”, M12-M100
	COUPLING NUT/LONG NUT	ANSI/ASME, DIN STANDARD	1/2”-4”, M12-M100
	SQUARE NUT	ANSI/ASME, DIN 557	1/2”-4”, M12-M100
	HEX DOOMD CAP NUT	ANSI/ASME, DIN1587	1/2”-4”, M12-M100
	WING NUT	ANSI/ASME, DIN315	1/2”-4”, M12-M100
WASHER	FLAT WASHER	ANSI/ASME B18.22.1, DIN125	3/8”-4”, M6-M100
WASHER	SPRING WASHER	ANSI/ASME B18.21.1, DIN127	3/8”-4”, M6-M100

Testing before shipping

Step 1: Size Detection

Step 2: GO Gauge and NO-GO Gauge Detection

Step 3: Chemical Composition Detection

Step 4: Mechanical Properties Test

Step 5: The product is carefully packaged

1. Fire protection systems, seawater purification systems, hydraulic and perfusion piping systems in marine engineering.

2. Bleaching tank in cellulose pulp production.

3. Polished bars in corrosive oil wells.

4. Hose system in marine engineering.

5. Pipelines, joints, gas flow systems, etc. in acid gas production.

6. Components in the flue gas desulfurization system.

7. Evaporators, heat exchangers, filters, mixers, etc. in phosphoric acid production.

8. Sulfuric acid separation and condensation system.

Specifications
Form	Standard
Metal Type	UNS N07718
Bar	ASTM B637 AMS 5662 AMS 5663 AMS 5664 PWA 1009 PWA 1010 GE B50TF15
Wire	AMS 5832
Sheet	ASTM B670 AMS 5596 AMS 5597 PWA 1033 GE B50TF14 ASTM B670 ASTM B637
Plate	ASTM B670 AMS 5596 AMS 5597 PWA 1033 GE B50TF15 ASTM B670 ASTM B637
Tube	AMS 5589 AMS 5590
Pipe	AMS 5589 AMS 5590
Fitting
Forging	ASTM B637 AMS 5562 AMS 5663 AMS 5664 PWA 1009 PWA 1010 GE B50TF15
Weld Wire	A5.14 ERNiFeCr-2
Weld Electrode
Din	2.4668

Mechanical Property Requirements
	Ultimate Tensile	Yield Strength (0.2% OS)	Elong. in 2 in. (50mm) or 4D min, %	R/A	Hardness Brinell
Min	185 KSi	150 KSi	12	15	331
Max
Min	1275 MPa	1034 MPa
Max

Chemical Requirements
	Ni	Fe	Mo	Mn	Si	Cr	C
Max	55	Bal	3.3	0.35	0.35	21	0.08
Min	50		2.8			17