Hastelloy C-276 has a excellent resistance to localized corrosion, stress corrosion cracking, oxidizing and reducing media, which is suit for a wide variety of chemical process environments, including ferric and cupric chlorides, hot contaminated media (organic and inorganic), formic and acetic acids, seawater and brine solutions. Meanwhile, Hastelloy C276 is the few kinds of material that can withstand the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide.

Different Countries Steel No. Chart

Forms of Hastelloy C-276 Fastener Available at JM-INDUSTRY

	Product name	Standard No.	Size
BOLT	HEX HEAD BOLT	ANSI/ASME B18.2.1, DIN933, DIN931	1/4”-4”, M5-M100
	SOCKET CAP SCREW	ANSI/ASME B18.3, DIN912, DIN7991, DIN913/916	1/4”-4”, M5-M100
	FLANGE BOLT	ANSI/ASME B18.2.3.4M-2001, DIN 6921	1/2”-4”, M10-M100
	EYE BOLT	ANSI/ASME, DIN standard	1/2”-4”, M10-M100
	OTHER BOLT	U BOLT, T BOLT, J BOLT, SQURE HEAD BOLT, SHOULDER BOLT, AND NON-STANDARD BOLT ACCORDING TO CUSTOMER NEEDS.
STUD	THREADED ROD/BAR	ANSI/ASME, DIN975/DIN976	3/8”-4”, M5-M100
	DOUBLE ENDS STUDS	ANSI/ASME, DIN STANDARD	3/8”-4”, M5-M100
NUT	HEX NUT	ANSI/ASME B18.2.2, DIN934	1/4”-4”, M5-M100
	HEAVY HEX NUT	ANSI/ASME B18.2.2, DIN standard	1/2”-4”, M12-M100
	NYLON LOCK NUT	ANSI/ASME B18.16.6-2008, DIN 985,DIN982	1/2”-4”, M12-M100
	FLANGE NUT	ANSI/ASME, DIN6923	1/2”-4”, M12-M100
	COUPLING NUT/LONG NUT	ANSI/ASME, DIN STANDARD	1/2”-4”, M12-M100
	SQUARE NUT	ANSI/ASME, DIN 557	1/2”-4”, M12-M100
	HEX DOOMD CAP NUT	ANSI/ASME, DIN1587	1/2”-4”, M12-M100
	WING NUT	ANSI/ASME, DIN315	1/2”-4”, M12-M100
WASHER	FLAT WASHER	ANSI/ASME B18.22.1, DIN125	3/8”-4”, M6-M100
	SPRING WASHER	ANSI/ASME B18.21.1, DIN127	3/8”-4”, M6-M100

Testing before shipping

Step 1: Size Detection

Step 2: GO Gauge and NO-GO Gauge Detection

Step 3: Chemical Composition Detection

Step 4: Mechanical Properties Test

Step 5: The product is carefully packaged

Nonferrous Bolts,Hex Cap Screws, and Studs from  JM Hardware®  are according to ASTM F468M-05a